42.
(A) what things are called
(B) how sports are played
(C) why different languages are spoken
(D)what words are often spelled differently

38. In the reading, after Jesse Cohen talks about an idea, he often gives an example to make it clear. Below are four of the sentences in the third paragraph. Which is used as an example? (A) “However, this rule can be bad for children.” (B) “Dolls help with their early language use, and building toys are good for learning math and science.” (C) “Some doctors worry that children may use the same kind of thinking when they look for jobs in the future.” (D) “If they do, they may miss something more important than just getting a chance to play with different toys.” 

39. What is the reading mostly about? (A) Marie Colvin’s war reports. (B) Marie Colvin’s working life. (C) Marie Colvin’s schooldays at Yale. (D)Marie Colvin’s experiences in Homs.

40. What does it mean when someone has empathy? (A) They are good at taking war photos. (B) They like to read other people’s life stories. (C) They are able to understand how other people feel. (D)They are good at helping people change their own lives.

41. Which is true about Marie Colvin? (A) The chance to study at Yale made her leave her job in the Middle East. (B) The experience in Sri Lanka did not change her way of reporting news. (C) She was killed in Homs when she was interviewing soldiers there for her report. (D)She was not sure what to do in the future until she worked for the Sunday Times.

43. (A) how old they are (B) who they speak to (C) where they grew up (D)whether they are men or women

1. 有關對中碳鋼S45C施工法的敘述，下列何者正確？ (A)淬火可增加鋼材硬度 (B)退火可增加鋼材硬度 (C)冷作結果不改變材料性質 (D)熱鍛可得精緻表面粗糙度

2. 應用模具於常溫下之生產作業，下列何者正確？ (A)選用熱作鋼SKD61材料，製作板金衝剪加工用之沖頭 (B)壓床適用於剪切、衝孔加工 (C)衝床適用於彎曲、抽製加工 (D)採用SKD11材料製作搓牙模板，以進行螺栓牙形之大量生產

3. 鋼鐵組織中出現麻田散體相之敘述，何者正確？ (A)經由擴散過程形成之相 (B)鄰近碳原子之晶格結構受到熱應力影響產生扭曲畸變所致 (C)與材料內部碳含量多寡無關 (D)麻田散體相為面心立方結構

4. 某砂輪規格為WA-60-K-8-V，其中WA是代表下列何者？ (A)製法 (B)粒度 (C)磨料 (D)組織

5. 塊規分四級，在 20℃標準室溫及 50%標準濕度下，AA級(或稱00級)塊規公稱尺寸 在25mm以下時，其精度誤差需 (A)小於±0.05μm以內 (B)小於±0.10μm以內 (C)小於±0.20μm以內 (D)小於±0.40μm以內