717 When passing the railroad crossing, it is ok to press the emergency button to make sure it is functioning and that it will not fail during an emergency.
(A)O
(B)X

713 When coming to a level crossing without a guard, gate, alarm, or light signal, the motorist should stop 2 to 6 meters before the crossing to stop, look and listen, and then pass through the crossing if there are no incoming trains.(A)O(B)X

714 When driving, after a driver sees a sign or marking that indicates level crossing, speed should be slowed down to under 15km per hour.(A)O(B)X

715 When a vehicle is breaken down or stuck in heavy traffic, or when obstacles are spotted on the railroad crossing, locate and press the emergency stop button immediately.(A)O(B)X

716 The emergency stop button on the railroad crossing is for life threatening situations only. Once activated, it may have a great impact on the rail traffic. Shall not abuse pressing the button during non-emergency situation.(A)O(B)X

718 When the manual emergency stop button on the engine column next to the railroad crossing is activated, the red light encircling of the button will keep flashing.(A)O(B)X

719 When an obstacle is found on the railroad crossing, if the vehicle cannot be dispelled or the obstacle cannot be removed from railway, get away from the railroad crossing when the alarm goes off.(A)O(B)X

720 When the car is stuck on a railroad crossing, the driver or a passersby can press the red emergency button beside the guard rail so that the train conductor can brake and decelerate to avoid unnecessary loss of life and property.(A)O(B)X

721 If the car is stuck on the railroad crossing due to breakdown or traffic jam, the driver or any passersby should quickly press the emergency button and try to push the car away from the railroad crossing. If the car cannot be pushed away and the emergency button is announcing, ʺthe train is coming, please leave the railroad crossing as soon as possibleʺ, leave the railroad crossing as soon as possible.(A)O(B)X

722 When a car is broken or unmovable on a railroad crossing, pushing the car away from the crossing as soon as possible. If it is unmovable, quickly press the emergency button so that the train conductor can be alerted and hit the breaks to avoid collisions.(A)O(B)X

723 After the emergency button on the railroad crossing is activated, the train conductor will be alerted of the situation ahead from 800 meters away and decelerate.(A)O(B)X