(1) Determine the angular velocities of links AB and BD for the position shown if the band has a spoed of 2 n/s.

4. [20 points] The vertical position of the 100-kg block is adjusted by the screw-activated wedge. Calculate the moment M which must be applied to the handle of the screw to raise the block. The single-thread screw has square threads with a mean diamcter of 30 mm and advances 10 mm for cach complete turn. The coetficient of friction for the screw threads is 0.25, and the coefficient of friction for all mating surfaces of the block and wedge is 0.40. Neglect friction at the ball joint A.

5. [14 points] A ball of negligible size and mass m is given a velocity of vo on the center of the cart which has a mass M and is originally at rest. If the coeficient of restitution between the ball and walls A and B is e, determine the velocity of the ball and the cart just after the ball strikes A. Also, determine the total time needed for the ball to strike A, rebound, then strike B. and rebound and then return to the center of the cart. Neglect friction.

(2) Determine the angular acceleration of link BD.

1. [16 points] Define and describe the following terms: (I) Free-body diagram. (2) Wrench (in the force system). (3) Angular momentum. (4) Instantaneous center of rotation.

(1) For known forces that act on a two-dimensional structure, which of the following is true? (a) For external determinacy, it is an unstable structure. (b) For internal determinacy, it is an unstable structure. (c) There are 2 zero-force members in the structure. (d) All of the above.

(2) A rectangular plate swings from arms of equal length as shown below. What is the magnitude of the angular velocity of the plate? (a) O rad/s (b) I rad/s (c) 2 rad/s (d) 3 rad/s (e) Need to know the location of the center of gravity.

(3) If the clockwise angular velocity of crankshaft AB is constant, which of the following statement is true? (a) The angular velocity of BC is constant (b) The linear acceleration of point B is zero (c) The angular velocity of BC is counterclockwise (d) The linear acceleration of point B is tangent to the path.

3. [15 points] The beam AB has a negligible mass and thickness and is subjected to a triangular distributed loading. It is supported at one end by a pin and at the other end by a post having a mass of 50 kg and negligible thickness. Determine the two cocficients of static friction at B and at C so that when the magnitude of the applied force is increased to P = 150 N the post slips at both B and C simultaneously.

6.(20%) A projectile enters a resisting medium at x = 0 with an initial velocity vo = 270 m/s and travels 100 mm before coming to rest. Assuming that the velocity of the projectile is defined by the relation v = vo - kx, where v is expressed in m/s and x is in m, determine (a) the initial acceleration of the projectile. (b) the time required for the projectile to penetrate 97.5 mm into the resisting medium.

5. (15%) A 30-kg block rests on top of a 20-Kg block supported by, but not attached to, a spring of constant 40 N/m. The upper block is suddenly removed. Determine (a) the maximum speed reached by the 20-kg block, (b) the maximum height reached by the 20-kg block.

110年 - 110 國立中山大學碩士暨碩士專班招生考試_機電系碩士班/乙組:應用力學(含靜力學及動力學)#104258

110年 - 110 國立臺灣大學_碩士班招生考試_機械工程研究所機械製造組:應用力學(C)(包含靜力學、動力學）#101324

110年 - 110 國立臺灣大學_碩士班招生考試_生物機電工程學研究所甲組: 應用力學(B)#100928

110年 - 110 國立臺灣大學_碩士班招生考試_土木工程研究所交通組:應用力學(A)#100584