(1) Determine the kinetic energy of the tile as it reaches Q. (10%)

(1) F=400N, as shown in Figure 1(a). (10%)

(2) The mass of body C which is attached to the cable is 45 kg, as shown in Figure 1(b). (10%) (b) Figure 1

(1) The elevator is moving upwards with a constant velocity of 2.0 m/s. The power delivered to the motor is 15.2 kW. (10%)

(2) The elevator is moving upwards with a velocity of 1.5 m/s and an acceleration of 1.2 m/s . The power delivered to the motor is 15.1 kW.(10%)

(2) Determine the distance L shown. (10%)

4. A collar A of mass m may slide freely along a horizontal rod. A bar of mass 3m and length L is connected to A by a smooth joint so that it is contained in a vertical plane, as shown in Figure 4. The system is released from rest in the position where the bar makes a 450 angle with the vertical. Determine the speed of collar A when the bar becomes vertical. (20%) Hint: It can be assumed that the speed of the collar is v, the angular velocity of the rod is ω, and the acceleration of gravity is g. 

5. A sliding puck hits another puck of the same mass, as shown in Figure 5. Friction may be neglected. What is the coeffcient of restitution if both pucks move at the same speed after impact? (20%) Hint: It can be assumed that the radius of the puck is r.

(D) Species C is adsorbed on the catalyst at 700 K:(1) Ture, (2) False), (3) Cannot tell (3%)

(C)Species C is adsorbed on the catalyst surface at 400 K:(1) Ture,(2) False), (3) Cannot tell (3%)

(B) The reaction is endothermic: (1) Ture, (2) False), (3) Cannot tell (3%)

110年 - 110 國立臺灣科技大學_碩士班招生試題_化學工程系：化工熱力學與動力學#113043

110年 - 110 國立臺北科技大學_碩士班招生考試_車輛工程系：動力學#107823

110年 - 110 國立中山大學碩士暨碩士專班招生考試_機電系碩士班/丁組:動力學#104255

110年 - 110 國立中央大學_碩士班招生考試_機械工程學系/固定與設計組(一般生):動力學#103872

110年 - 110 國立臺灣大學_碩士班招生考試_機械工程研究所固體力學、系統控制組:動力學(A)#100865

110年 - 110 國立臺灣大學_碩士班招生考試_應用力學研究所甲組:動力學(B)#100852

110年 - 110 國立臺灣大學_碩士班招生考試_工程科學及海洋工程學研究所丙組:動力學(C)#100778

110年 - 110 國立臺灣大學_碩士班招生考試_機械工程研究所機械設計組:動力學(D)#100707