2. (20%)

If blocks A and B of mass 0 kg and 6 kg, respectively. are placed on the inclined plane and released. determine the force

developed in the link. The coetticients of kinetic friction between the blocks and the inelined plane are μ_A. =0.1 μ_B= 0.3. Neglect the mass of the link.

1. (20%) The motorcycle travels along the elliptical track at a constant speed ν . Determine its smallest acceleration if a > b.

3. (20%) If the 75-kg crate starts from rest at A. determine its speed when it reaches point B. The cable is subjected to a constant force of F=300N. Neelect friction and the size of the pulley.

4.(20%) The boat has a mass of I 80 kg and is traveling forward on a river with a constant velocity of 70 kn/h. measured relative to the river. The river is flowing in the opposite direction at 5 km/h. If a tube is placed in the water, as shown, and it collects 40 kg of water in the boat in 80 s, determine the horizontal thrust T on the tube that is required to overcome the resistance due to the water collection and yet maintain the constant speed of the boat. ( Pw = 1 Mg/m3) 

5.(20%) A car of mass m is traveling at a slow velocity vo. If it is subjected to the drag resistance of the wind. which is proportional to its velocity. FD = ky. where k is a known propotional constant. Determine the distance and the time the car will travel before its velocity becomes 0.5vo. Assume no other frictional forces act on the car.

(D) Species C is adsorbed on the catalyst at 700 K:(1) Ture, (2) False), (3) Cannot tell (3%)

(C)Species C is adsorbed on the catalyst surface at 400 K:(1) Ture,(2) False), (3) Cannot tell (3%)

(B) The reaction is endothermic: (1) Ture, (2) False), (3) Cannot tell (3%)

(A) The reaction is exothermic: (1) Ture, (2) False), (3) Cannot tell (3%)

7. (11%) In an ammonia decomposition reaction to generate N2 and H2 on a Platinum catalyst (2NH3 → N2 + 3H2) the rate can be expressed as -r = kKAPA/KHPH, where k is the rate constant, PA and PH indicate the pressures of ammonia and hydrogen, and KA and KH are the adsorption constants for ammonia and hydrogen. Suggest a mechanism and the assumptions consistent with the rate equation and prove it.

(c) Would you expect to have temperature variations within the pellet or across the gas film?(5%) 

110年 - 110 國立臺灣科技大學_碩士班招生試題_化學工程系：化工熱力學與動力學#113043

110年 - 110 國立臺北科技大學_碩士班招生考試_車輛工程系：動力學#107823

110年 - 110 國立中山大學碩士暨碩士專班招生考試_機電系碩士班/丁組:動力學#104255

110年 - 110 國立中央大學_碩士班招生考試_機械工程學系/固定與設計組(一般生):動力學#103872

110年 - 110 國立臺灣大學_碩士班招生考試_機械工程研究所固體力學、系統控制組:動力學(A)#100865

110年 - 110 國立臺灣大學_碩士班招生考試_應用力學研究所甲組:動力學(B)#100852

110年 - 110 國立臺灣大學_碩士班招生考試_工程科學及海洋工程學研究所丙組:動力學(C)#100778

110年 - 110 國立臺灣大學_碩士班招生考試_機械工程研究所機械設計組:動力學(D)#100707