59. What are the names of the three boxes numbered 1, 2, and 3？
(A) switch, saw blade holder, latch holder
(B) speed control knob, saw blade adjuster, pressure plate adjuster
(C) platform fixing knob , saw blade holder, saw blade adjustment handle
(D) saw blade adjustment handle, pressure plate, saw blade holder

41. If you want to take material from a 0.8 x 1.8 x 15cm waste wood strip to make a small wood block as shown on the right, the square side length of this wood block is 1.8cm, and the hole in the middle is Ø 5.5mm. Which one is the proper working procedure？ (A) Drill first and then saw (B) First saw and then drill (C) Simultaneous sawing and drilling (D) The order of sawing and drilling does not matter

42. What is the correct name of component A？ (A) Resistor (B) Inductor (C) Diode (D) Sensor

43. What are the correct name and symbol of component B？ (A) Plastic film capacitor, (B) Ceramic capacitor, (C) Electrolytic capacitor, (D) Electrolytic capacitor,

44. What are the correct name and symbol of component D？ (A) Resistor, (B) Transistor,(C) Transistor, (D) Capacitor,

45. What is the correct name of component E？ (A) Capacitor (B) Diode (C) Light emitting diode (D) Transistor

46. When testing ,what should the range of selection button and the red and black probes be？ (A) B20, p, o (B) C200K (or C20K or C2000K), p, o (C) C200, p, o (D) H, p, o

47. When testing ,what should the range of selection button and the red and black probes be？ (A) H (or C200), q, r (B) H, r, q (C) C20K, q, r (D) C2000K, q, r

48. When testing , what should be the range of selection button and the red and black probes be？ (A) B20 (or G9V), t, s (B) H, t, s (C) D200, t, s (D) G1.5V, s, t

49. The color of the four codes on this resistance is "orange, orange, brown and gold". What area should the range selector turn to when testing, so that it can be read more accurate values？ (A) C200 (B) C2000K (C) C200K (D) C2000

50. When testing the quality of a small DC light bulb, if you turn the range selector of the digital multimeter to 200 in the ohm range, and then touch the test rod to the top of the bulb thread and the thread respectively, the panel value will show "5.7", what is the resistance value of the bulb？ (A) 5.7KΩ (B) 5.7Ω (C) 5.7MΩ (D) This bulb is broken and cannot be measured

114年 - 114 高雄市市立國民中學教師聯合甄選：生活科技#129017

114年 - 114 臺南市市立國民中學_正式教師聯合甄選試題：生活科技專門科目#128064

114年 - 114 桃園市國民中學新進教師聯合甄選試題：生活科技科#127899

114年 - 114 中區縣市政府教師甄選策略聯盟：國中生活科技#127545

114年 - 114 臺北市市立國民中學_正式教師聯合甄選：生活科技科#127438

114年 - 114 新北市立國民中學_教師聯合甄選試題：生活科技科#127240

114年 - 114 教育部受託辦理_公立高級中等學校教師甄選試題：生活科技科#126910

114年 - 114-1 國立中興大學附中_正式教師甄試﹕生活科技#126813

114年 - 114-1 國立臺南第二高級中學_教師甄選試題：生活科技科#126414

114年 - 114-1 國立屏科實驗高級中等學校_專任教師甄選初試試題_國中部：生活科技科#126393