661 When the centrifugal force creates inertia that pulls you away during a curve on mountain roads, it is mainly due to the wrong entry point or speeding.
(A)O
(B)X

657 When the centrifugal force creates inertia during a curve on mountain roads, latch onto the throttle and lean forward in the same direction as the motorcycle. Do not release the throttle and do not brake.(A)O(B)X

658When the centrifugal force creates inertia that pulls you away during a curve on mountain roads, release the throttle and brake immediately.(A)O(B)X

659 Releasing the throttle completely while going around a curve would result in the loss of thrust in the rear wheel and creating centrifugal force that causes inertia.(A)O(B)X

660 Releasing the throttle completely and braking while going around a curve will cause straight-line braking, which will change the traveling path, and cause failing cornering, may cause danger.(A)O(B)X

662 When riding on the mountain road, and the centrifugal force creates inertia that pulls you away, it is due to the wrong entry point. Hold the throttle steady and lean forward in the same direction as the motorcycle as a danger solution.(A)O(B)X

663 When riding a motorcycle and spotting a pothole on the road, if it is too late to avoid the pothole, slow down and maintain the balance. Release the brake when riding over the pothole, relax the body and jump with the motorcycle using the legs as support to avoid danger. Do not brake while riding over the pothole. The brakes might press the front shock absorbers and cause malfunctions.(A)O(B)X

664 The motorcycles equipped with continuously variable automatic transmissions have no engine brakes.(A)O(B)X

665 When a motorcycle is passing through the waterlogged roads, water will flood into the drum brakes, causing brake malfunction. Therefore, after passing through the waterlogged area, test the brakes to remove the water from the brake lining with frictions.(A)O(B)X

666 The correct method to slow down the motorcycle is to first release the throttle to produce engine brake and then use the front and rear brakes to slow down.(A)O(B)X

667 While braking a manual transmission motorcycle, do not pull the clutch. Use the front and rear brakes only to stop the vehicle.(A)O(B)X