113年 - NTM-00610機車法規是非題-英文(113/01/10)651-700#122845

科目：駕照◆機車法規(英文) | 年份：113年 | 選擇題數：50 | 申論題數：0

試卷資訊

所屬科目：駕照◆機車法規(英文)

選擇題 (50)

651 Before straight-line braking, both the front and back brakes of a motorcycle should be used simultaneously to prevent drifting off track and shorten the braking distance.(A)O(B)X

652 When using the front brake of the motorcycle, do not brake suddenly and completely to avoid too much pressure on the front shock absorbers. The rear wheel will spin off the ground and cause a crash.(A)O(B)X

653 Individuals lacking driving experience and adequate knowledge on the right of way should enhance the required knowledge through learning to prevent accidents.(A)O(B)X

654 A motorcycle should decelerate to a safe speed before going around a curve. Hold the throttle to maintain a constant speed while entering the curve to produce thrust from the rear wheel and pass through the curve steadily.(A)O(B)X

655 When riding on the mountain road, a motorcycle should decelerate to a safe speed before going around a curve. Determine the correct entry point, lean forward in the same direction as the motorcycle, and hold the throttle steady to maintain the backward thrust during cornering.(A)O(B)X

656 The essential body movements for going around the curve include shifting the hips before entering the curve, leaning forward in the same direction as the motorcycle, relaxing the left shoulder, left elbow and left wrist when turning toward the left and relaxing the right shoulder, right elbow, and right wrist while using the right hand as the main control when turning to the right. Keep the throttle steady to maintain the backward thrust during cornering.(A)O(B)X

657 When the centrifugal force creates inertia during a curve on mountain roads, latch onto the throttle and lean forward in the same direction as the motorcycle. Do not release the throttle and do not brake.(A)O(B)X

658When the centrifugal force creates inertia that pulls you away during a curve on mountain roads, release the throttle and brake immediately.(A)O(B)X

659 Releasing the throttle completely while going around a curve would result in the loss of thrust in the rear wheel and creating centrifugal force that causes inertia.(A)O(B)X

660 Releasing the throttle completely and braking while going around a curve will cause straight-line braking, which will change the traveling path, and cause failing cornering, may cause danger.(A)O(B)X

661 When the centrifugal force creates inertia that pulls you away during a curve on mountain roads, it is mainly due to the wrong entry point or speeding.(A)O(B)X

662 When riding on the mountain road, and the centrifugal force creates inertia that pulls you away, it is due to the wrong entry point. Hold the throttle steady and lean forward in the same direction as the motorcycle as a danger solution.(A)O(B)X

663 When riding a motorcycle and spotting a pothole on the road, if it is too late to avoid the pothole, slow down and maintain the balance. Release the brake when riding over the pothole, relax the body and jump with the motorcycle using the legs as support to avoid danger. Do not brake while riding over the pothole. The brakes might press the front shock absorbers and cause malfunctions.(A)O(B)X

664 The motorcycles equipped with continuously variable automatic transmissions have no engine brakes.(A)O(B)X

665 When a motorcycle is passing through the waterlogged roads, water will flood into the drum brakes, causing brake malfunction. Therefore, after passing through the waterlogged area, test the brakes to remove the water from the brake lining with frictions.(A)O(B)X

666 The correct method to slow down the motorcycle is to first release the throttle to produce engine brake and then use the front and rear brakes to slow down.(A)O(B)X

667 While braking a manual transmission motorcycle, do not pull the clutch. Use the front and rear brakes only to stop the vehicle.(A)O(B)X

668 When a manual transmission motorcycle is in motion, pull the clutch, and the vehicle will start coasting.(A)O(B)X

669 When a manual transmission motorcycle is in motion, pull the clutch, and the vehicle will decelerate suddenly.(A)O(B)X

670 When a manual transmission motorcycle is in motion, if the gear is not properly downshifted, it will cause engine lock and the rear wheel will slip to a side.(A)O(B)X

671 When operating a vehicle regularly on gravel roads or places with severe environmental pollution, it is not necessary to increase the frequency for cleaning the air filter because there will be no impact on the engine's lifespan.(A)O(B)X

672 When braking a motorcycle on a road that is in good condition, hold the right brake lever firmer than the left to brake the front wheel more than the rear wheel. However, adjust the brake according to road conditions. When road conditions are bad, use less strength when braking the front wheel.(A)O(B)X

673 When washing the motorcycle, keep the object which is sensitive to dampness in the motorcycle compartment to avoid its damage.(A)O(B)X

674When the main switch is turned to either the ON or OFF position, the fuel gage on the dashboard will indicate the railroad of fuel usage.(A)O(B)X

675 Turn on the headlights, rear lights and the instrument lights on the dashboard before starting the motorcycle engine.(A)O(B)X

676 When the engine does not start 3 to 5 seconds after hitting the engine starter button, turn the throttle grip by 1/8 to 1/4 of the rotation and it will be easier to start.(A)O(B)X

677 When the engine does not start after pressing the engine start button for more than 10 seconds, do not wait until 10 seconds later to pressing again. Pressing continuously will not cause engine damage.(A)O(B)X

678 It is more difficult to start the motorcycle engine when it has been inactive for a long time, or the gasoline is depleted before refilling. Rotate the throttle slightly and then return it to the original position. Press the starter several times and that should start the engine.(A)O(B)X

679 After starting a cold engine, it should not be warmed-up for too long.(A)O(B)X

680 Do not leave a motorcycle helmet hanging on the hook while riding to prevent it from damaging other cars.(A)O(B)X

681 High engine temperature would increase the temperature inside the compartment under the seat. Do not place any items that are sensitive to heat in the compartment to avoid damage, such as electronic product, fresh food and volatile item.(A)O(B)X

682 When the motorcycle comes to a complete stop, switch the turn signal back into the original position and turn the main switch key to the "ON" position to turn the engine off.(A)O(B)X

683 While a motorcycle is traveling, the main switch key can be turned at any time to avoid accidents and danger.(A)O(B)X

684 After parking the motorcycle, get off from the left side on a flat surface area that does not obstruct traffic and prop up the motorcycle on the centerstand.(A)O(B)X

685 To prevent theft, lock the handlebar and remove the key after parking the motorcycle.(A)O(B)X

686 When checking the engine oil, the motorcycle should be on a flat ground surface and propped up on the centerstand. 2 to 3 minutes after turning off the engine, remove the oil dipstick, wipe it clean and reinsert it. Remove the oil dipstick again and check whether the oil railroad is between the upper or lower limit .(A)O(B)X

687 Check the motorcycle regularly for the brake lining wear at the dealer or service center. Replace the brake lining when it is worn beyond the warning line.(A)O(B)X

688 When the battery terminals are corroded and covered with a white powdery substance, wipe it off with warm water and apply a layer of protective oil.(A)O(B)X

689 When the lights on the motorcycle suddenly black out at night, the fuse may be burned.(A)O(B)X

690 The purpose of the air filter is to filter out the dust suctioned into the cylinder. Too much dust accumulation or moisture would prevent the air from flowing freely and result in overly high concentration of gas in the air mixture, incomplete combustion, weak engine output, and increasing fuel consumption .(A)O(B)X

691 Installing handle gloves on the motorcycle provides warmth and shelter from the wind and rain without affecting safety.(A)O(B)X

692 Running a cold engine in high speed would shorten its lifespan.(A)O(B)X

693 A motorist should refer to the driver's manual for the appropriate octane number of the gasoline.(A)O(B)X

694 If you use the gasoline with octane number that is much lower than it suggested, it might cause abnormal combustion, which will result in blasting, fuel waste, and low engine power.(A)O(B)X

695 When twisting off the fuel cap before refueling, there might still be pressure remaining in the fuel tank. Twist the fuel cap counterclockwise halfway. Then twist the cap off completely after the "hissing" sound stops to keep the oil from spilling and causing damages.(A)O(B)X

696 It is the best to check the engine oil before riding the motorcycle to ensure that the oil railroad remains within the safety range shown on the dipstick. Too much engine oil will increase the engine load and fuel consumption.(A)O(B)X

697 When checking the railroad of engine oil, the vehicle must be parked on a flat surface.(A)O(B)X

698 The engine should be running when checking the railroad and quality of engine oil.(A)O(B)X

699 It is safe to check the railroad of the engine oil immediately after the engine is turned off.(A)O(B)X

700 Excessive wear on tire threads should not affect traffic safety.(A)O(B)X

申論題 (0)