阿摩線上測驗
登入
首頁
>
駕照◆機車法規(英文)
>
113年 - NTM-00610機車法規是非題-英文(113/01/10)651-700#122845
> 試題詳解
684 After parking the motorcycle, get off from the left side on a flat surface area that does not obstruct traffic and prop up the motorcycle on the centerstand.
(A)O
(B)X
答案:
登入後查看
統計:
尚無統計資料
詳解 (共 1 筆)
MoAI - 您的AI助手
B1 · 2025/10/12
#6880171
1. 題目解析 題目要求在停放摩托車後...
(共 771 字,隱藏中)
前往觀看
0
0
其他試題
680 Do not leave a motorcycle helmet hanging on the hook while riding to prevent it from damaging other cars.(A)O(B)X
#3317374
681 High engine temperature would increase the temperature inside the compartment under the seat. Do not place any items that are sensitive to heat in the compartment to avoid damage, such as electronic product, fresh food and volatile item.(A)O(B)X
#3317375
682 When the motorcycle comes to a complete stop, switch the turn signal back into the original position and turn the main switch key to the "ON" position to turn the engine off.(A)O(B)X
#3317376
683 While a motorcycle is traveling, the main switch key can be turned at any time to avoid accidents and danger.(A)O(B)X
#3317377
685 To prevent theft, lock the handlebar and remove the key after parking the motorcycle.(A)O(B)X
#3317379
686 When checking the engine oil, the motorcycle should be on a flat ground surface and propped up on the centerstand. 2 to 3 minutes after turning off the engine, remove the oil dipstick, wipe it clean and reinsert it. Remove the oil dipstick again and check whether the oil railroad is between the upper or lower limit .(A)O(B)X
#3317380
687 Check the motorcycle regularly for the brake lining wear at the dealer or service center. Replace the brake lining when it is worn beyond the warning line.(A)O(B)X
#3317381
688 When the battery terminals are corroded and covered with a white powdery substance, wipe it off with warm water and apply a layer of protective oil.(A)O(B)X
#3317382
689 When the lights on the motorcycle suddenly black out at night, the fuse may be burned.(A)O(B)X
#3317383
690 The purpose of the air filter is to filter out the dust suctioned into the cylinder. Too much dust accumulation or moisture would prevent the air from flowing freely and result in overly high concentration of gas in the air mixture, incomplete combustion, weak engine output, and increasing fuel consumption .(A)O(B)X
#3317384