阿摩線上測驗
登入
首頁
>
轉學考-工程力學
>
90年 - 90 淡江大學 轉學考 工程力學#56328
>
題組內容
3.
(a) Determine the components of the forces acting on each member of the frame shown in Fig. 3 10%
其他申論題
(b) X之期望值E (X)及變異數V (X)。 （10分）
#213999
(b)若樣本數n=16，試求μ=26.7時的檢定力（power)。 （5分）
#214000
【已刪除】1 • Draw the shear force and bending moment diagrams for the beam shown in Fig. 1 20%
#214001
【已刪除】2. A cantilever beam AB with a uniform load of intensity q acting on the right-hand half of the beam is shown in Fig. 2. Use the moment-area method to find the angle of rotation θB and deflection δB at the free end B. (flexural rigidity =2EI on section AC, and flexural rigidity =EI on section CB ) 20%
#214002
(b) Determine the internal forces in member ABE at point J. 10%
#214004
【已刪除】4. A beam of T-section is supported and loaded as shown in Fig. 4. The cross section has width b = 2.5 in, height h =3 in., and thickness t = 0.5 in. Determine the maximum tensile and compressive stresses in the beam. 20%
#214005
(a) Frame
#214006
(b) Two-force member
#214007
(c) Linear elasticity
#214008
(d) Yield stress
#214009
阿摩線上測驗
登入
阿摩線上測驗
登入