阿摩線上測驗
登入
首頁
>
轉學考-工程力學
>
91年 - 91 淡江大學 轉學考 工程力學#56330
>
題組內容
3. A steel test specimen is tension tested and found to have the following properties:
(a) 20,000 psi at proportional limit
其他申論題
【已刪除】c)檢定
#214022
【已刪除】d)若某員工工作經驗爲5個月，設求其所需工作時間之 95%信賴區間.＜10%＞
#214023
【已刪除】1. Determine the forces in members AB, HB, and CF of the pin jointed truss as shown in Figure 1. (20%)
#214024
【已刪除】2. Determine the x and y coordinates of the centroid of the T-section shown in Figure 2. Then determine the moments of inertia about the centroidal axes, Ix and Ir (20%)
#214025
(b) 24,000 psi at 0.2 percent offset yield point. Determine the total strain in the specimen when it is stressed to the yield point. (20%)
#214027
【已刪除】4. A solid circular steel shaft must carry a torque of 250 foot-pounds without twisting more i tha，4 degrees per foot of length. Determine the required dimensions for the shaft. (20%)
#214028
(1) which one is the most ductile material, (4%)
#214029
(2) which one is the material having the highest ultimate stress, (4%)
#214030
(3) which one is the material exhibiting nonlinear elastic behavior, (4%)
#214031
(4) which one is the most brittle material, (4%) and
#214032
阿摩線上測驗
登入
阿摩線上測驗
登入