阿摩線上測驗
登入
首頁
> 最新資料
最新資料
瀏覽最新的試卷、試題和詳解,掌握最新考試資訊
最新科目
鐵路◆電機機械(概要)
專科學力鑑定◆專(二):機械元件設計
國營事業◆單元操作
最新試卷
114年 - 114 臺北自來水事業處及所屬工程總隊新進職員(工)甄試_共同科目:國文(作文)#137499(1題)
114年 - 114 臺北自來水事業處及所屬工程總隊新進職員(工)甄試_土木工程_四級工程師:土木工程#137496(40題)
114年 - 114 臺北自來水事業處及所屬工程總隊新進職員(工)甄試_土木工程_四級工程師:自來水工程#137491(50題)
114年 - 114 國營臺灣鐵路股份有限公司_資產開發處、附業營運處、北區營運處從業人員聯合甄試_第 10 階-助理事務員-事務管理_專業科目一:事務管理大意#137448(50題)
114年 - 114 國營臺灣鐵路股份有限公司_資產開發處、附業營運處、北區營運處_從業人員聯合甄試_第 10 階-助理事務員/事務管理_專業科目二:行政法大意#137447(50題)
114年 - 114 關務人員考試_三等_財稅行政、關稅法務、關稅會計、關稅統計、資訊處理、機械工程、電機工程、化學工程、紡織工程、輻射安全技術工程、藥事(選試英文):外國文(英文)#137433(27題)
114年 - 114 教育部自學進修專科學校學力鑑定考試試題_美容造型設計:職場衛生與安全#137378(50題)
114年 - 114 教育部自學進修專科學校學力鑑定考試試題_商業設計、室內設計、工業設計 :基本設計#137377(50題)
114年 - 114 教育部自學進修專科學校學力鑑定考試試題_機械工程、造船工程、工業工程、紡織工程、製鞋技術、機電工程:機械元件設計#137376(50題)
114年 - 114-3 交通部航港局_船員岸上晉升適任性評估筆試測驗_一等大副:航海與船舶操縱#137375(50題)
最新試題
20. A uniform plate of mass M is placed on two fast-rotating identical wheels of radius r. The coefficients of kinetic friction between the plate and both wheels are μ, the distance between the centers of the two wheels is , the wheel on the right (left) rotates counterclockwise (clockwise) with angular speed ω (see Fig. 5), and the gravitational acceleration is denoted g. If the mass center of the plate is displaced by d from the center of the two wheels, what is the frequency the plate oscillates with? (Assuming the plate is so heavy that it always stays on the wheels.)(A) ω (B) (C) (D)
19. As shown in Fig. 4, an m1 = 1.0 kg block is placed on top of an m2 = 8.0 kg block, which lies on a frictionless surface. The coefficient of kinetic friction between the two blocks is 0.20; they are connected via a pulley and a string. A hanging block of mass m3 = 6.0 kg is connected to the mass m2 block via another pulley and string. Both strings are massless and the pulleys are frictionless. What is the acceleration magnitude of the blocks? (Gravitational acceleration g =9.8 m/s²) m1 m2 M3 Figure 4. A system composed of three blocks, strings, and pulleys. (A) 3.7 m/s² (B) 2.7 m/s² (C) 9.7 m/s2 (D) 8.0 m/s²
18. The effective resistance from a to b in Fig.3 is 4.0 2.What is the resistance of individual resistors in the circuit? (The resistances of all the individual resistors are the same.) (A) 4.02(B)2.0 Ω (C) 8.0 Ω (D) 0.8 2
最新申論題
(b) Use curved arrows to describe the detailed mechanism of these two steps. (8 points)
(a) Please draw two key resonance structures of diazomethane. (8 points)
2.Electrophilic aromatic substitution reactions of pyridine normally occur at C3. Draw the carbocation intermediates resulting from reaction of an electrophile at C2, C3, and C4, and explain the observed result. (14 points)
最新課程
高一學測生物
講師:
Ginny Chen
簡介:
各位摩友大家好 首先很開心大家能夠點入這個平台,相信點入的大家,對生物部分的學測內容是具有需求的,希...
【WriteMol英文】小小作家的英文寫作班:小學篇
講師:
小摩喵(課程:警鴿系列)
簡介:
歡迎來到【WriteMol英文】小小作家的英文寫作班:小學篇!本課程是專為國小學生而設計的英文作文課程。透過...
【WriteMol英文】青春作家的英文寫作班:國中篇
講師:
小摩喵(課程:警鴿系列)
簡介:
歡迎來到【WriteMol英文】青春作家的英文寫作班:國中篇!本課程是專為國中學生而設計的英文作文課程。在這...
最新主題筆記
犯罪特性
課程:
犯罪學概要
章節:
犯罪學基本概念
描述:
犯罪特性
統計測量方法
課程:
犯罪學概要
章節:
犯罪學基本概念
描述:
統計測量方法
犯罪觀點論(一致觀、衝突觀、互動觀)
課程:
犯罪學概要
章節:
犯罪觀點論
描述:
犯罪觀點論(一致觀、衝突觀、互動觀)
最新討論
5. 下列有關無編碼 RNA (non-coding RNA, ncRNA)功能的敘述,何者最不恰當? (A) microRNA (miRNA)藉著配對互補的模板 mRNA 調節轉譯 (B) microRNA 與 small interfering RNA (siRNA)的前驅分子(precursor)皆為單股 (C) piwi-interacting RNA (piRNA)可誘導異染色質(heterochromatin)的產生 (D) 有些 ncRNA 會促成 X 染色體基因的去活化
47. 下列關於 small interfering RNA (siRNA)的敘述何者正確? (A) 可以折疊成 tRNA 結構 (B) 核糖體中的小 RNA 組成之一 (C) 長度約為 20 到 25 個核苷酸,可和 mRNA 互補配對抑制基因表達 (D) 又稱 Dicer,可分解 mRNA
54. Which phase of mitosis is characterized by centrosomes located at the opposite pole and chromosomes aligned at the equator of cells? (A) prophase (B) prometaphase (C) metaphase (D) anaphase (E) telophase
34.請問下列哪些狀況是教保服務人員於執行業務時一發現,就必須立即向直轄市、縣(市)主管機關通 報,至遲不得超過二十四小時?甲、幼兒施用毒品乙、幼兒逾期未接受預防接種丙、幼兒被人利用在街上行乞丁、幼兒必須立即就醫而未就醫戊、幼兒與 13 歲就讀國一的哥哥單獨在家 (A)甲丙丁 (B)甲丙戊 (C)甲丙丁戊 (D)甲乙丙丁戊。
22 依實務見解,關於教師與學校關係,下列敘述何者錯誤?(A)公立各級學校教師與學校間之基礎關係,為行政契約關係 (B)公私立大學教師資格審定與升等之決定,均為行政處分 (C)公立學校教師之解聘,其法律性質屬不利益行政處分 (D)私立大學教師對於解聘,得以教育部之核准為程序標的,提起撤銷訴訟
23. 二行程主機典型的滑油系統,經外部管路及內部通道將滑油送入機器各部件潤滑,下列何者為錯誤? (A) 主軸承、曲柄栓軸承 (B) 導靴、導板 (C) 凸輪軸軸承、傳動齒輪 (D) 推力軸承、轉車機